AS BOATS d.o.o.
Turnerjeva ulica 2, 2313 Fram, Slovenija
T: +386 2 608 41 41
E: info@as-boats.si
Facebook
Youtube
Beneteau
Delphia
Four Winns
Italmar
Rinker
Glastron
Prince
Brig
Suzuki


 

Ker je življenje zabavnejše na vrhu

Suzuki kot proizvajalec motorjev raste že desetletja. Iskreno, ostali niti niso imeli možnosti. Noben drug proizvajalec ne more konkurirati Suzukijevi tehnologiji in izkušnjam pri visoko zmogljivih in lahkih 4-taktnih motorjih, na svetovnih navtičnih, avtomobilskih, motociklističnih in štirikolesnih tržiščih.

Te izkušnje so osnovane na zvestobi 4-taktni tehnologiji, ki ni bila nikoli vprašljiva. Medtem, ko so ostali proizvajalci eksperimentirali z alternativnimi 2-taktnimi tehnologijami, da bi zadovoljili okoljske standarde, je Suzuki ostal pri tem, kar zna najbolje - zanesljivi in močni 4-taktni motorji, ki povsem ustrezajo današnjim modernim plovilom. 

Rezultat je največja ponudba 4-taktnih motorjev. Od najmanjšega prenosnega motorja z 2,5 konjskimi močmi, do štiri litrskega V6 motorja s 300 konjskimi močmi. Suzuki ponuja izbiro prav vsakemu navtiku. Dvajset modelov motorjev, vsak od njih vsebuje najnaprednejše tehnologije, to lahko ponudi le vodilni proizvajalec 4-taktnih izvenkrmnih motorjev na svetu.

Dosežen je vrh, vendar pot še ni končana. Od Suzukija v prihodnosti pričakujte še večje in še boljše. Mi pričakujemo prav to. Močnejše, tišje in varčnejše 4-taktne motorje, ki navtikom nudijo kvaliteto in zanesljivost, ki jo pričakujejo. Prav tako servisno-prodajno mrežo, ki zagotavlja vzdrževanje, podporo in opremo, ki jo navtiki potrebujejo. 


SUZUKI TECHNOLOGYPOWERFULOFFSET DRIVESHAFT

EXPLANATION :

The engine powerhead is positioned closer to the front, moving the outboard’s center of gravity forward.

ADVANTAGE :

■ Less vibration
■ More compact
■ Stable steering performance

 

2-STAGE GEAR REDUCTION

EXPLANATION :

This system which incorporates the Offset Driveshaft features a first stage reduction between the crankshaft and drive shaft, and a second stage reduction inside the gear case. This design makes a larger gear ratio possible, allowing it to turn a large diameter propeller.

ADVANTAGE :

■ High propulsive efficiency with large diameter propeller.
■ Powerful navigation, maintaining propeller rotation even with a larger load.
■ Tremendous power to turn large diameter propellers, offering quick acceleration.



MODELGEAR
RATIO
DF70A/
80A/90A
DF100A/
115A/140A
DF150(AP)/
175(AP)/200A(AP)
DF200/
225/250
DF250AP/
300AP
DF350A
2.59:12.59:12.50:12.29:12.08:12.29:1

 

 

HIGH ENERGY ROTATION

EXPLANATION :

These outboards are equipped with gears designed with a 2.42 gear ratio, which is larger than the standard model, in their lower units.
When combined with a large 14-inch (36cm) propeller, the powerful system can deliver an explosive forward thrust.

ADVANTAGE :

■ Powerful navigation and precise maneuvering even with big loads.
■ Tremendous power to turn large diameter propellers, offering quick acceleration.

 

VVT (VARIABLE VALVE TIMING)

EXPLANATION :

The Variable Valve Timing is used to control the open and close timing on the intake valve depending on the engine operation.

ADVANTAGE :

■ Offers smooth, powerful torque.
■ Provides tremendous acceleration during operation for all speed ranges.

MULTI-STAGE INDUCTION

EXPLANATION :

Manifold pipes are switched between short and long ones during low speed and high speed operation to ensure the right volume of air enters the engine.

ADVANTAGE :

■ Increases output during high speed operation with greater volume of air input.
■ Increases combustion efficiency and maximizes torque by increasing the density in the air intake during low speed operation.

DIRECT AIR INTAKE

EXPLANATION :

Designing a direct airflow path from the intake port to the cylinder suppresses any increase in the intake temperature and improves combustion efficiency.

ADVANTAGE :

■ Delivers higher power output from a small displacement with improved combustion efficiency.

FUEL EFFICIENTLEAN BURN

EXPLANATION :

The Lean Burn Control System supplies the right fuel and air mixture depending on the navigation conditions.

ADVANTAGE :

■ Significant improvement in fuel economy in all speed ranges especially at cruising speed.
■ Fuel is saved and gasoline costs are cut thanks to improved fuel economy.

Uses 14% less fuel compared to the original DF300, mainly in the cruising range where the engine is used a majority of the time. Data used in this graph was obtained through in-house testing under uniformed conditions. Results will vary depending on operating conditions(boat design, size, weight, weather, etc).

BATTERY-LESS ELECTRONIC FUEL INJECTION

EXPLANATION :

Parts used in the larger models have been redesigned into a more compact design and mounted onto smaller size models.

ADVANTAGE :

■ Quick and easy start.
■ Cleaner and economic fuel consumption.
■ Higher performance in almost all operating ranges.

DUAL INJECTORS

EXPLANATION :

The dual injector delivers just the right amount of fuel at the right time into each cylinder.

ADVANTAGE :

■ Contributes to higher output and better fuel efficiency.

RELIABLESELF-ADJUSTING TIMING CHAIN

EXPLANATION :

The timing chain runs in an oil-bath so it never needs lubricating, and is equipped with an automatic hydraulic tensioner so it remains properly adjusted at all times.

ADVANTAGE :

■ More durability compared to belt types of same class.
■ Maintenance-free.

SUZUKI ANTI-CORROSION FINISH

EXPLANATION :

Special protection is applied to the aluminum surface using high strength bonding to protect the aluminum made exterior parts.

ADVANTAGE :

■ Protection against corrosion helps increasethe overall engine durability.

SUZUKI DUAL LOUVER SYSTEM

EXPLANATION :

The new DF350A is equipped with a dogleg shaped dual louver at the air intake to completely remove water from the air taken into the cowl.

ADVANTAGE :

■ Allows a direct intake system, contributing to higher engine output.

TWO-WAY WATER INLET

EXPLANATION :

The engine’s cooling system relies on water supplied through low water inlets located on the lower unit, featuring two water inlets where usually there is only one.

ADVANTAGE :

■ Increases the water flow, providing better cooling performance.
■ Positioning an inlet at the front of the gear case delivers a greater water supply not only at high speeds but also during shallow drive.

 

SUZUKI DUAL LOUVER SYSTEM

EXPLANATION :

It helps protect the engine from water in the fuel using a water detecting fuel filter to alert the operator with both visual and audio warnings when water is present in the fuel.

ADVANTAGE :

■ Can avoid water in fuel, which can lead to issues like poor combustion, lower power output and corrosion.

 

INNOVATIVESUZUKI DUAL PROP SYSTEM

EXPLANATION :

The Suzuki Dual Prop System spins two propellers rotating in opposite directions on a single engine.

ADVANTAGE :

■ More stability when driving straight by eliminating the lateral forces associated with a single propeller.
■ Engine power is transferred to the water more efficiently.
■ Powerful backing and breaking force.
■ Less water resistance due to small size of gear case.
■ Good water gripping performance and quick startup acceleration.

 

SUZUKI PRECISION CONTROL(ELECTRONIC THROTTLE AND SHIFT SYSTEMS)

EXPLANATION :

Operation from the remote control is delivered to outboard via an electric signal and not by the traditional mechanical control cables.

ADVANTAGE :

■ Less friction and resistance compared to mechanical type that uses actual control cables.
■ Quick and reliable operation.
■ Lean Burn integration offers improved fuel economy for a wide range of speed.

SUZUKI TROLL MODE SYSTEM (OPTIONAL EQUIPMENT)

EXPLANATION :

A system that keeps the boat running at a certain speed in low revs. Equipped in all tiller handle models DF40A and up.

ADVANTAGE :

■ Boat can keep running at a certain speed in low revs without having to operate the throttle on the boat.

 

 

THREE-WAY STORAGE

EXPLANATION :

The design allows the outboard to be removed from the boat and placed on any of its 3 sides for storage.

ADVANTAGE :

■ Can be stored anywhere.
■ No need to worry about the loading space or method.

SUZUKI SELECTIVE ROTATION

EXPLANATION :

Function for selecting regular or counter rotation on one outboard with an optional connector.

ADVANTAGE :

■ Either regular or counter rotation can be used on the same outboard.

TILT LIMIT SYSTEM

EXPLANATION :

A Tilt Limit System that prevents the outboard from tilting beyond a certain angle.

ADVANTAGE :

■ Prevents damage to the boat or outboard due to excessive outboard tilting.

QUIET OPERATION

EXPLANATION :

Intake noise is suppressed with a resonator, which makes the noise from the outboard quieter.

ADVANTAGE :

■ Quiet operation.
■ Less noise, making boating more pleasant.

KEYLESS START SYSTEM

EXPLANATION :

System that allows you to start the engine by have the key-fob nearby.

ADVANTAGE :

■ Helps deter theft more than a normal key system.

■ Key does not need to be inserted.

 

SUZUKI LEADS IN AWARD WINNING INNOVATION

The Innovation Awards (recognizing technological innovation) granted each year by the NMMA (National Marine Manufacturers Association) are considered among the highest honors in marine technology. Of the new marine industry products in that year, they are awarded to “a product that shows technical leadership, is practical and cost-effective, and is truly beneficial to the consumer.” Starting with the DT200 Exanté in 1987 and extending to the DF30A/DF25A in 2014. Suzuki outboard motors has received this Innovation Award a total of eight times. Seven of these awards have been for four-stroke outboard motors, which is the largest number of awards in the engine category in the industry.

Awarded Prizes

1987: DT200 Exanté / 1997: DF70 & DF60 / 1998: DF50 & DF40 / 2003: DF250 / 2006: DF300 / 2011: DF50A & DF40A / 2012: DF300AP / 2014: DF30A & DF25


copyright suzuki motor corporation. all rights reserved.